The Mystic Mask is made with just two components - the polycarbonate mask frame and the skirt in liquid silicone, which mechanically hold the lenses, without the use of the usual lens rings. This design limits encumbrances and reduces the inner volume of the mask. The fact that there are no lens rings also increases the visual field around the external perimeter of the lens. The protruding strap regulation teeth have been increased in order to allow for greater regulation. The buckles are made in acetylic resin in order to increase traction and flexion strain. They are tightly connected to the mask body making the face free to adapt to the shape of your face. Their rotation, downwards and upwards, has a maximum angle of about 70 degrees. The front panel, in TPR, is molded in the mask body; however the mask can be disassembled in order to replace standard lenses with prescription lenses. Both the mask frame and the skirt have a non-reflecting satin finish.
Please note that Freediving and spearfishing are inherently dangerous sports and should only be undertaken by experienced, well-trained divers. More powerful spearguns must be fired with two hands and a locked elbow to prevent injury from excess recoil. Do not load or unload your speargun out of the water, treat every speargun as if it were loaded. Never point your speargun at anything you do not intend to shoot. Before you begin your dive, be sure to check all your gear. You should never dive alone and your equipment should be serviced regularly. You should always plan your dive and dive your plan. You should discuss safety precautions, your plan, and contingency plans with everyone onboard BEFORE you dive. Communication among divers and operators is imperative. Failure to adhere to these guidelines could potentially result in physical harm or death. Blue Tuna Spearfishing is not responsible for any loss, damage, harm, or death caused by using any of our products.
©2007-2017 Blue Tuna Spearfishing. All rights reserved.