A one of a kind original Stiletto designwith a smooth edge on one side and serrated on the other. The stainless steel at the base of the blade ends at the bottom of the handle to increase strength and make the knife solid. The stainless steel used is a high carbon content type of molybdenum chromium steel which is a very hard metallic element used to strengthen steel alloys. This steel allows for a very fine high degree of sharpening. The steel is treated cryogenically meaning hardened at extremely low temperatures to increase its hardness and resistance to wear, scuffs, and corrosion. The blade features a slit to lock the tails of spear shafts should they get stuck between rocks. Another hole in the handle features a loader for pneumatic spearguns. The sheath has been designed to be easy to use with a swift locking system for the knife. It also has a safety latch using a ring to avoid accidentally loosing the knife. The knife can be attached on the divers belt or with the straps to the calf.
Please note that Freediving and spearfishing are inherently dangerous sports and should only be undertaken by experienced, well-trained divers. More powerful spearguns must be fired with two hands and a locked elbow to prevent injury from excess recoil. Do not load or unload your speargun out of the water, treat every speargun as if it were loaded. Never point your speargun at anything you do not intend to shoot. Before you begin your dive, be sure to check all your gear. You should never dive alone and your equipment should be serviced regularly. You should always plan your dive and dive your plan. You should discuss safety precautions, your plan, and contingency plans with everyone onboard BEFORE you dive. Communication among divers and operators is imperative. Failure to adhere to these guidelines could potentially result in physical harm or death. Blue Tuna Spearfishing is not responsible for any loss, damage, harm, or death caused by using any of our products.
©2007-2017 Blue Tuna Spearfishing. All rights reserved.