The new OMER carbon fiber blades manufactured using the infusion technology with innovative double vacuum process. Thanks to this technology the carbon fiber stands are impregnated perfectly in the resin without the risk of forming micro bubbles and with an optimal distribution of the resin itself. In addition the percentage of necessary resin is reduced considerably more than before with a great increase in performance characteristics of the blade. The specific carbon fiber strand used was developed specifically for the Manufacture of freediving fins and patented. The underlying result is a very comfortable fin providing high performance to the diver. Aside from not tiring out the divers legs while kicking on the surface for extended periods the OMEr Carbon blades push the diver the most during descents and ascents even in great depths. The interchangeable blades are available in three degrees of stiffness: 20 soft, 25 medium, and 30 hard.
Please note that Freediving and spearfishing are inherently dangerous sports and should only be undertaken by experienced, well-trained divers. More powerful spearguns must be fired with two hands and a locked elbow to prevent injury from excess recoil. Do not load or unload your speargun out of the water, treat every speargun as if it were loaded. Never point your speargun at anything you do not intend to shoot. Before you begin your dive, be sure to check all your gear. You should never dive alone and your equipment should be serviced regularly. You should always plan your dive and dive your plan. You should discuss safety precautions, your plan, and contingency plans with everyone onboard BEFORE you dive. Communication among divers and operators is imperative. Failure to adhere to these guidelines could potentially result in physical harm or death. Blue Tuna Spearfishing is not responsible for any loss, damage, harm, or death caused by using any of our products.
©2007-2017 Blue Tuna Spearfishing. All rights reserved.